The Handle Center
A Complete System for Stamp Mount Center Drilling and Handle Insertion
Purchase the entire system or choose any of the components in order to complement the equipment you already have on hand!
Handle Insertion Press
Handle Insertion Press
This machine will significantly reduce the time required for handle-installation while assuring that the flat front of every handle is in perfect alignment with the front of the mount. The handle-holder and work-table stops are designed to automatically square the flat side of the handle with the front of the stamp. Stamps of mixed mount- and handle-sizes may be assembled with tremendous efficiency. Table-stops and handle-holder may be set and locked for even greater efficiency on long runs of identical stamps. The built-in counter indicates the quantity of stamps that have been assembled, and the work-light fully illuminates the work-table. A one-year limited warranty is included.
Drill Press Mounted on Handle Center Stand
Drill Press
Perfect for stamp mounts! Compact size with a 1/3 hp motor, providing plenty of power for drilling wood or plastic stamp-mounts. Five speeds ranging from 600 to 3000 rpm. 1/2" chuck capacity with an 8-1/4" swing and a 2" stroke. 90-day limited warranty. 110-120 volt, 60 Hz, 6 amps. 47 lbs. net, 60 lbs. shipping weight. Catalog #DP.
Drill Press Stand
Angle steel framework for supporting the drill press. Includes a built-in foot pedal for the Self-centering Vise. 29" high, 22" x 31" at the base, 3/4" plywood table. 26 lbs. shipping weight. Catalog #DPS.
Self-Centering Vise
Self-Centering Vise
Automatically locates the center of the stamp mount below the drill bit. No more scribing the center of mounts or "eyeballing" the center with marginal results. With the stamp mount placed on the Self-centering Vise, press the foot pedal with your right foot. The aluminum-alloy jaws grab the mount and hold it precisely under the drill. All-steel construction with precision-hardened and ground pivot-shafts. 7-1/2" wide x 16-1/4" long x 2-1/2" high. Catalog #SCV. Includes foot pedal.
SCV Maximum Mount Sizes | |
|---|---|
Mount Width |
Maximum Length |
| 1/4" | 8" |
| 1/2" to 1" | 7-3/4" |
| 1-1/8" to 1-5/8" | 7-1/2" |
| 1-3/4" to 2-1/4" | 7" |
| 2-1/2" to 3" | 6-3/4" |
|
| |
Handle Drill Bits
Brad point for perfect centering, two outer spurs for clean, precise holes. Highly polished for quick chip-removal. Overall length 4-3/8", flute length 3". Standard sizes are 1/4", 5/16", and 3/8". Other sizes are available.
Handle Center Packages | |
|---|---|
Package No. 1 |
Package No. 2 |
| Includes the Drill Press, Self-centering Vise, set of three Drill Bits, and Drill Press Stand with foot pedal. 110 lbs. shipping weight. Catalog # HCP-1. | Includes the items listed in Package No. 1 plus our Handle Insertion Press. 155 lbs. shipping weight. Catalog #HCP-2. |
Stamp Die Cutters
Request Literature
Equipment Price List
Copyright Jackson Marking Products 2006